Positioning
You are now in the shop area for Positioning.
The products represent an extract from our delivery range.
For viewing our complete assortment, please go to the Shop or to Downloads.
The left navigation bar lists further sub-areas from our delivery range.
The products represent an extract from our delivery range.
For viewing our complete assortment, please go to the Shop or to Downloads.
The left navigation bar lists further sub-areas from our delivery range.
Kienle finger splint, size 1, 29cm long
Kienle finger splint, size 1, 29cm long.
The broader end section of this finger splint enables the wrist to be supported as well as the finger. The slightly flexible finger section can be bent to meet the individual needs of the patient.
Product description
Kienle finger splint, size 1, 29cm long.
The broader end section of this finger splint enables the wrist to be supported as well as the finger. The slightly flexible finger section can be bent to meet the individual needs of the patient.
Product description
Round Böhler finger splint, 23cm
The aluminium wire means that these finger splints are radio-opaque and flexible. The splints, which have a notch/eyelet, are especially suitable for use where the finger needs to be somewhat elongated, since the dressing that is passed through the notch (eyelet) cannot slip out.
Product description
The aluminium wire means that these finger splints are radio-opaque and flexible. The splints, which have a notch/eyelet, are especially suitable for use where the finger needs to be somewhat elongated, since the dressing that is passed through the notch (eyelet) cannot slip out.
Product description
Stack splint, size 1, white; finger circumference 4.5cm
Extensor tendon injuries are treated conservatively using Stack splints. The Stack splint principle is based on the hyperextension of the injured distal phalanx of the finger. It is attached using strips of adhesive tape or Velcro, which ensures a secure fit. Among other things, it is made from thermoplastic acrylic resin that is perforated in several places to improve comfort and to prevent against maceration of the skin. This material can be shaped using a flame (e.g. Bunsen burner) and in hot water. The cap over the middle...
Product description
Extensor tendon injuries are treated conservatively using Stack splints. The Stack splint principle is based on the hyperextension of the injured distal phalanx of the finger. It is attached using strips of adhesive tape or Velcro, which ensures a secure fit. Among other things, it is made from thermoplastic acrylic resin that is perforated in several places to improve comfort and to prevent against maceration of the skin. This material can be shaped using a flame (e.g. Bunsen burner) and in hot water. The cap over the middle...
Product description
Roll of aluminium tape, 15mm wide, 3m long, padded.
This aluminium tape has an aluminium thickness of 1mm, is padded with foam on one side, and is used to immobilize fingers. After measuring the required length, you simply cut it off. The length of the splint should be chosen to ensure that it reaches 3 - 4cm over the back of the injured fingertip. To prevent it from slipping, several strips of adhesive tape can be arranged in a semi-circular fashion on the finger. It is fixed into place with a gauze or elastic bandage. The aluminium means that the dressing remains radio-opaque. The rolls are...
Product description
This aluminium tape has an aluminium thickness of 1mm, is padded with foam on one side, and is used to immobilize fingers. After measuring the required length, you simply cut it off. The length of the splint should be chosen to ensure that it reaches 3 - 4cm over the back of the injured fingertip. To prevent it from slipping, several strips of adhesive tape can be arranged in a semi-circular fashion on the finger. It is fixed into place with a gauze or elastic bandage. The aluminium means that the dressing remains radio-opaque. The rolls are...
Product description
Aluminium splint, 40x9cm, padded on one side
This splint is for the immobilization, protection, fixation, and so on of the forearm and upper arm. It is padded with foam on one side and the aluminium means that it remains radio-opaque.
Product description
This splint is for the immobilization, protection, fixation, and so on of the forearm and upper arm. It is padded with foam on one side and the aluminium means that it remains radio-opaque.
Product description
Carr right-hand hand support splint, 21cm long.
The Carr hand support splint is fixed into place with a gauze bandage. The aluminium means that it remains radio-opaque.
Product description
The Carr hand support splint is fixed into place with a gauze bandage. The aluminium means that it remains radio-opaque.
Product description
Magnus arm support wedge, 53x22cm support surface, 30cm in height.
Made of foam with a washable white artificial leather cover or a cover in a colour chosen from the colour chart. Support surface: 53 x 22 cm, height: 30cm. for supporting the arm, especially for patients in beds with an elevated head end.
Product description
Made of foam with a washable white artificial leather cover or a cover in a colour chosen from the colour chart. Support surface: 53 x 22 cm, height: 30cm. for supporting the arm, especially for patients in beds with an elevated head end.
Product description
Arm abduction cushion, 35cm-wide support surface, for 30º, 60º, and 90º.
This arm abduction cushion is used for supporting the arm in an abduction position of 30º, 60º, or 90º. The cushion is fixed into place using an adjustable shoulder and stomach strap. Width of support surface: 38 cm, total size: 38 x 22.5 x 36 cm
Product description
This arm abduction cushion is used for supporting the arm in an abduction position of 30º, 60º, or 90º. The cushion is fixed into place using an adjustable shoulder and stomach strap. Width of support surface: 38 cm, total size: 38 x 22.5 x 36 cm
Product description
Injection cushion, 45x15cm, 8/4cm in height.
Can be delivered with Velcro or frieze band for fixation to the arm and bed on request. The injection cushions and infusion cushion are made from foam and have a washable white plastic cover or a cover in a colour chosen from the colour chart.
Product description
Can be delivered with Velcro or frieze band for fixation to the arm and bed on request. The injection cushions and infusion cushion are made from foam and have a washable white plastic cover or a cover in a colour chosen from the colour chart.
Product description
Positioning wedge, 25x20x11cm, normal
X-ray positioning wedges and cushions are used to position the patient in X-ray diagnostics and therapy because they provide an optimum, radiolucent underlay. The X-ray positioning parts are available in the following variants: Normal (normal yellow foam) and antibacterial (antibacterial foam with a PU covering). The PU covering is washable and protects the foam from dirt and damp. Please note the different item numbers for the normal and antibacterial variants. The antibacterial foam with the PU covering is autoclavable at 120ºC and 1 bar.
Product description
X-ray positioning wedges and cushions are used to position the patient in X-ray diagnostics and therapy because they provide an optimum, radiolucent underlay. The X-ray positioning parts are available in the following variants: Normal (normal yellow foam) and antibacterial (antibacterial foam with a PU covering). The PU covering is washable and protects the foam from dirt and damp. Please note the different item numbers for the normal and antibacterial variants. The antibacterial foam with the PU covering is autoclavable at 120ºC and 1 bar.
Product description
Rectangular X-ray positioning part, 24x18x3cm.
X-ray positioning wedges and cushions are used to position the patient in X-ray diagnostics and therapy because they provide an optimum, radiolucent underlay. The X-ray positioning parts are available in the following variants: Normal (normal yellow foam) and antibacterial (antibacterial foam with a PU covering). The PU covering is washable and protects the foam from dirt and damp. Please note the different item numbers for the normal and antibacterial variants. The antibacterial foam with the PU covering is autoclavable at 120ºC and 1 bar...
Product description
X-ray positioning wedges and cushions are used to position the patient in X-ray diagnostics and therapy because they provide an optimum, radiolucent underlay. The X-ray positioning parts are available in the following variants: Normal (normal yellow foam) and antibacterial (antibacterial foam with a PU covering). The PU covering is washable and protects the foam from dirt and damp. Please note the different item numbers for the normal and antibacterial variants. The antibacterial foam with the PU covering is autoclavable at 120ºC and 1 bar...
Product description
Head positioner, 25x20x10cm, dorsal position, normal.
X-ray positioning wedges and cushions are used to position the patient in X-ray diagnostics and therapy because they provide an optimum, radiolucent underlay. The X-ray positioning parts are available in the following variants: Normal (normal yellow foam) and antibacterial (antibacterial foam with a PU covering). The PU covering is washable and protects the foam from dirt and damp. Please note the different item numbers for the normal and antibacterial variants. The antibacterial foam with the PU covering is autoclavable at 120ºC and 1 bar...
Product description
X-ray positioning wedges and cushions are used to position the patient in X-ray diagnostics and therapy because they provide an optimum, radiolucent underlay. The X-ray positioning parts are available in the following variants: Normal (normal yellow foam) and antibacterial (antibacterial foam with a PU covering). The PU covering is washable and protects the foam from dirt and damp. Please note the different item numbers for the normal and antibacterial variants. The antibacterial foam with the PU covering is autoclavable at 120ºC and 1 bar...
Product description
Foam splint for adults, 75x30cm with plastic sole.
For supporting a stretched out leg; immobilization and positioning following operations, inflammations, and fractures. The foam insole reduces the risk of club foot. The sole of the splint is reinforced with a plastic plate. Rotation is prevented by the lateral upstands.
Product description
For supporting a stretched out leg; immobilization and positioning following operations, inflammations, and fractures. The foam insole reduces the risk of club foot. The sole of the splint is reinforced with a plastic plate. Rotation is prevented by the lateral upstands.
Product description
Schulze elevation splint, size 1, with plastic sole, 75x25x18cm.
These (Braun/Schulze) foam splints are for elevating the leg if a fracture, dislocation, or bruise has been sustained, for rendering first aid, and for short-term treatments, phlebitis, and thrombosis. The padded plastic insole reduces the risk of club foot. Additional stability can be achieved by means of a radiolucent, plastic-covered frame. The foam is soft and thus does not impede circulation.
Product description
These (Braun/Schulze) foam splints are for elevating the leg if a fracture, dislocation, or bruise has been sustained, for rendering first aid, and for short-term treatments, phlebitis, and thrombosis. The padded plastic insole reduces the risk of club foot. Additional stability can be achieved by means of a radiolucent, plastic-covered frame. The foam is soft and thus does not impede circulation.
Product description
Pull-out leg splint, size 1, dismountable, pull-out base of 60-80cm.
This Braun/Baumann pull-out leg splint is dismountable. It supports a semi-bent knee.
Product description
This Braun/Baumann pull-out leg splint is dismountable. It supports a semi-bent knee.
Product description
Kirschner splint, size 1, no foot rest, 70cm long, 19-31cm thigh support.
90º-180º angle of inclination, variable bed distance of up to 30cm, variable height of between 0 and 37cm, splint length of 70cm, 19-31cm thigh support. This Kirschner leg support splint is completely adjustable. It can be used to elevate even stretched out legs. This helps the venous return of circulating blood. The splint is radio-opaque.
Product description
90º-180º angle of inclination, variable bed distance of up to 30cm, variable height of between 0 and 37cm, splint length of 70cm, 19-31cm thigh support. This Kirschner leg support splint is completely adjustable. It can be used to elevate even stretched out legs. This helps the venous return of circulating blood. The splint is radio-opaque.
Product description
Neck and knee roller, 40x13cm, PVC, welded.
For treatment, general support, and supporting the knee joint. Available in three sizes.
Product description
For treatment, general support, and supporting the knee joint. Available in three sizes.
Product description
Neck and knee roller, 40x13cm, white, artificial leather cover.
For treatment, general support, and supporting the knee joint and neck. Colour: White or in a colour chosen from the colour chart. Available in three sizes.
Product description
For treatment, general support, and supporting the knee joint and neck. Colour: White or in a colour chosen from the colour chart. Available in three sizes.
Product description
Semi-circular roller, size 1, white, 40x22x11cm.
Foam with a washable artificial leather with zip. Colour: White or in a colour chosen from the colour chart. Available in two sizes.
Product description
Foam with a washable artificial leather with zip. Colour: White or in a colour chosen from the colour chart. Available in two sizes.
Product description
Exercise roller, firm, 80x20cm, white.
These exercise rollers are made from firm, fatigue-proof foam with washable artificial leather covers. Special designs are available on request. Colour: White or in a colour chosen from the colour chart.
Product description
These exercise rollers are made from firm, fatigue-proof foam with washable artificial leather covers. Special designs are available on request. Colour: White or in a colour chosen from the colour chart.
Product description
Cramer finger splint, 20x2cm
The Cramer splint is a wire ladder splint. It is available in different lengths and widths and can also be bought by the metre. Its high flexibility means that it can be optimally shaped to suit the shape of the body. It has diverse applications for splinting the upper and lower extremities. If bought by the metre, a compound-leverage diagonal cutter should be used to cut it to length. Thanks to its diverse applications, the Cramer splint is used to splint both the upper and lower extremities. White, covered with plastic (RAL 9010).
Product description
The Cramer splint is a wire ladder splint. It is available in different lengths and widths and can also be bought by the metre. Its high flexibility means that it can be optimally shaped to suit the shape of the body. It has diverse applications for splinting the upper and lower extremities. If bought by the metre, a compound-leverage diagonal cutter should be used to cut it to length. Thanks to its diverse applications, the Cramer splint is used to splint both the upper and lower extremities. White, covered with plastic (RAL 9010).
Product description
Cramer splint, 60x10cm
The Cramer splint is a wire ladder splint. It is available in different lengths and widths and can also be bought by the metre. Its high flexibility means that it can be optimally shaped to suit the shape of the body. It has diverse applications for splinting the upper and lower extremities. If bought by the metre, a compound-leverage diagonal cutter should be used to cut it to length. Thanks to its diverse applications, the Cramer splint is used to splint both the upper and lower extremities. White, covered with plastic (RAL 9010).
Product description
The Cramer splint is a wire ladder splint. It is available in different lengths and widths and can also be bought by the metre. Its high flexibility means that it can be optimally shaped to suit the shape of the body. It has diverse applications for splinting the upper and lower extremities. If bought by the metre, a compound-leverage diagonal cutter should be used to cut it to length. Thanks to its diverse applications, the Cramer splint is used to splint both the upper and lower extremities. White, covered with plastic (RAL 9010).
Product description
Cramer angle splint, 45x30x8, minimum purchase quantity of 20 pcs.
The Cramer splint is a wire ladder splint. It is available in different lengths and widths and can also be bought by the metre. Its high flexibility means that it can be optimally shaped to suit the shape of the body. It has diverse applications for splinting the upper and lower extremities. If bought by the metre, a compound-leverage diagonal cutter should be used to cut it to length. Thanks to its diverse applications, the Cramer splint is used to splint both the upper and lower extremities. White, covered with plastic (RAL...
Product description
The Cramer splint is a wire ladder splint. It is available in different lengths and widths and can also be bought by the metre. Its high flexibility means that it can be optimally shaped to suit the shape of the body. It has diverse applications for splinting the upper and lower extremities. If bought by the metre, a compound-leverage diagonal cutter should be used to cut it to length. Thanks to its diverse applications, the Cramer splint is used to splint both the upper and lower extremities. White, covered with plastic (RAL...
Product description
Cramer splint roll, 500x8cm
The Cramer splint is a wire ladder splint. It is available in different lengths and widths and can also be bought by the metre. Its high flexibility means that it can be optimally shaped to suit the shape of the body. It has diverse applications for splinting the upper and lower extremities. If bought by the metre, a compound-leverage diagonal cutter should be used to cut it to length. Thanks to its diverse applications, the Cramer splint is used to splint both the upper and lower extremities. White, covered with plastic (RAL 9010).
Product description
The Cramer splint is a wire ladder splint. It is available in different lengths and widths and can also be bought by the metre. Its high flexibility means that it can be optimally shaped to suit the shape of the body. It has diverse applications for splinting the upper and lower extremities. If bought by the metre, a compound-leverage diagonal cutter should be used to cut it to length. Thanks to its diverse applications, the Cramer splint is used to splint both the upper and lower extremities. White, covered with plastic (RAL 9010).
Product description
Fixed bandage splint, 15x3cm, with 1 aluminium inlay.
The fixed bandage splints are made from foam with aluminium inlays. This makes them flexible and radio-opaque. The splints are protected from dirt by washable covers. On request, fixed bandage splints with a width of 7cm or more can be delivered with an eyelet.
For further sizes, see our Web shop:
Fixed bandage splints
Product description
The fixed bandage splints are made from foam with aluminium inlays. This makes them flexible and radio-opaque. The splints are protected from dirt by washable covers. On request, fixed bandage splints with a width of 7cm or more can be delivered with an eyelet.
For further sizes, see our Web shop:
Fixed bandage splints
Product description
Fixed bandage splint, 40x7cm, with 3 aluminium inlays.
The fixed bandage splints are made from foam with aluminium inlays. This makes them flexible and radio-opaque. The splints are protected from dirt by washable covers. On request, fixed bandage splints with a width of 7cm or more can be delivered with an eyelet.
For further sizes, see our Web shop:
Fixed bandage splints
Product description
The fixed bandage splints are made from foam with aluminium inlays. This makes them flexible and radio-opaque. The splints are protected from dirt by washable covers. On request, fixed bandage splints with a width of 7cm or more can be delivered with an eyelet.
For further sizes, see our Web shop:
Fixed bandage splints
Product description
Forearm fixed bandage splint, 40x7cm, with Velcro straps.
The forearm fixed bandage splint is used to position the arm for infusions. The splint is fixed into place using Velcro straps and has a washable artificial leather cover.
Product description
The forearm fixed bandage splint is used to position the arm for infusions. The splint is fixed into place using Velcro straps and has a washable artificial leather cover.
Product description
Neue Übungen als Videos auf bl...
dr. paul koch gmbh | Im Geiselrain 7 | 72636 Frickenhausen
Telephone: +49 (0) 70 22 / 4 05 95 -0 | Fax: +49 (0) 70 22 / 4 05 95 -55 | web: www.dr-koch.de
Telephone: +49 (0) 70 22 / 4 05 95 -0 | Fax: +49 (0) 70 22 / 4 05 95 -55 | web: www.dr-koch.de
